Products

RTU Adhesive B is a two-component, addition-curing silicone composition curing to a soft silicone adhesive.

MultiTech MultiFunctional I is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts MultiTech MultiFunctional I and 1 partMultiTech MultiFunctional I to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

RTU Encapsulant is a pourable, addition-curing, 2-part silicone rubber of low viscosity that cures extremely fastafter activation by UV light exposure to a soft silicone elastomer.

RTU Hot-Melt Adhesive is a standard hotmelt silicone adhesive, specifically designed for transdermal drug delivery systems. It can be melted for coating, and then will return to a generally flowless state upon cooling. RTU Hot-Melt Adhesive adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. RTU Hot-Melt Adhesive is produced through a condensation reaction of a silanol endblocked polydimethyl-siloxane (PDMS) with a silicate resin. The addition of a PDMS plasticizer to the condensate provides the adhesives hot melt characteristics.

RTU Adhesive A is a warm processable, high viscosity, high modulus, low conductive glass bonding adhesive can be used primerless on paint and glass._x005F _x005F It should be combined with a clear activator developed for Uniwipe Adhesives on ceramic coated glass. It is a one component, moisture curing, solvent free adhesive with excellent sag and bead stability based on polyurethane chemistry. The BRTU Adhesive A adhesive cures with environmental moisture and skin formation and curing is dependent on humidity, temperature and application dimensions._x005F _x005F All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.