Products

Thermoplastic Olefin Elastomers is a polypropylene high impact thermoplastic olefin. Applications: Utility or Recreational Vehicle exterior components: Fenders Hood Cladding Doors Automotive Exterior Parts Boat Jet-Propelled Vehicle Features: High Cold Temperature Impact Performance Good Scratch Resistance Benefits: Paintable Molded-in Color Bonds to Films (Camouflage)

CASE Ingredients Dye A is a solvent soluble dye which shows brilliant color in alcohols, glycol ethers, esters, and ketones.Valifast dyes are suitable for inkjet inks, writing inks, gravure printing inks, transparent foil lacquers, wood stains, plastics, and leather.

MultiTech Binder & Resin is UV-curable undercoat for metal vapor deposition. It has good adhesion not only to vapor deposition layer of aluminum, tin and indium but also to plastic substrates, such as ABS, PC(Polycarbonate) and PMMA. Automotive exterior/interior parts such as millimeter-wave radar emblems are suitable applications of UM-1273T.

MultiTech Rheology Modifier B hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

Composite Materials Molding Compound B is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. Composite Materials Molding Compound B is available in black.

Polymer Curing Agent A is a colorless, mobile liquid, consisting of peroxides based on methyl ethyl ketone, desensitized with phthalate plasticiser. This ketone peroxide is used mainly as an initiator (radical source) in the curing of unsaturated polyester and vinyl ester resins.

Composite Materials Surface Finish A Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, Composite Materials Surface Finish A coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Composite Materials Surface Finish A gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

Composite Materials Laminate B is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. Composite Materials Laminate B is certifiable to MIL-I-24768/3, Type GEB.

Silicone Elastomers A is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature.

MultiTech Corrosion Inhibitor Pigment C is non toxic and does not contain heavy metals such as zinc or other hazardous ingredients.

MultiTech Multifunctional E is a colorless liquid at room temperature (20°C). It is miscible in water and organic solvents. It is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters and polycarbonates Plasticizers Piperidine

RTU Metalworking Fluid is a premium quality multi-purpose, non-staining product formulated with a chlorinated performance additive. RTU Metalworking Fluid also contains an oiliness additive for additional performance, especially on draggy, soft metals. It gives excellent performance on high speed heavy duty operations on most types of steels and non-ferrous metals. This product can also be used as gear oil, hydraulic oil, and general machine oil.

Polyamide Resin A is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.We offer Polyamide Resin A for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Polyamide Resin A sets the market standards.Processing Technology: Injection MoldingSpecial Features: Heat stabilized, Hydrolysis resistant or enhanced hydrolytic stability