Products

MultiTech Rheology Modifier B hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

Composite Materials Molding Compound B is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. Composite Materials Molding Compound B is available in black.

Polymer Curing Agent A is a colorless, mobile liquid, consisting of peroxides based on methyl ethyl ketone, desensitized with phthalate plasticiser. This ketone peroxide is used mainly as an initiator (radical source) in the curing of unsaturated polyester and vinyl ester resins.

Composite Materials Surface Finish A Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, Composite Materials Surface Finish A coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Composite Materials Surface Finish A gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

Composite Materials Laminate B is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. Composite Materials Laminate B is certifiable to MIL-I-24768/3, Type GEB.

MultiTech B is designed for high wear and tear resistance and is well suited for lining and protective coverings in the mineral, metal, material handling, and mining industries.Features/BenefitsHigh abrasion resistance.Excellent wear and impact resistant properties.

MultiTech Corrosion Inhibitor A is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

Polyamide Resin A is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.We offer Polyamide Resin A for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Polyamide Resin A sets the market standards.Processing Technology: Injection MoldingSpecial Features: Heat stabilized, Hydrolysis resistant or enhanced hydrolytic stability

MultiTech D has good electrical properties under humid conditions, superior heat resistance, and superior arc resistance. Typical applications include heating appliance insulation, welding equipment nozzle insulation, heat barriers and specialty bearing applications. MultiTech D also complies with MIL-I-24768/17, Type GSG and ASTM D709 Type IV Grade G-7.

MultiTech MultiFunctional J is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

Composite Materials Core Material B is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

MultiTech Microbial Control Agent B is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.

DiTech Flame Retardant A is a high quality standard grade of Calcium Borosilicate used in a wide variety of applications.

Polymer Curing Agent B is a clear solution of acetyl acetone peroxide (AAP), or 2,4- Pentanedione peroxide in a phlegmatizer. Polymer Curing Agent B is a very effective polymerization initiator for the room temperature cure of unsaturated polyester resins and gives exceptionally fast cures without significantly affecting gel times in most resin systems. Polymer Curing Agent B has the added advantage of being a low fire or explosion hazard.

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.